1-855-365-HVAC

System Brand Selector

* Estimated Installed Price is provided to give you a "ballpark" estimate of what this type of system typically costs. In some cases, the installed price may be higher or lower than the estimates provided. For any type of HVAC installation, the price may vary significantly due to site/access conditions, the number of heating or cooling zones, as well as the features and options chosen. Financing estimates (if provided) are based on 36 Month financing with 20% down payment. Prices include all engineering & system design, materials, labor, testing & set-up, building permits and system warranty support.



Energy Kinetics 90+ Resolute Boiler

Est. Installed Price*
$17,500.00 to $20,000*

Est. Monthly Payment*
$265 to $300*

Energy Kinetics 90+ Resolute Boiler

Recommended

Exceptional Energy Efficiency that sidewall vents or vents through your existing chimney without an expensive stainless steel liner. Homeowners enjoy economical heat, plus virtually endless hot showers with lower energy costs. It’s a non-condensing 90+ AFUE in gas and oil models, and goes beyond AFUE with low idle loss for better delivered efficiency. 90+ Resolute is ideal for fin tube baseboard, cast iron radiators, air handlers, and unit heaters, complementing its exceptional performance with high efficiency and nearly endless hot water.  Our pressure vessel doesn’t suffer from the corrosive condensate that limits the life of many condensing boilers. Plus, there’s no condensate trap, neutralizer or drain required, which simplifies your installation and minimizes related service calls for years to come.

Features & Benefits

 


Energy Kinetics Accel CS

Est. Installed Price*
$18,000 to $22,000

Est. Monthly Payment*
$350 to $450

Energy Kinetics Accel CS High Efficiency Gas Boiler

Recommended

The strongest and most efficient condensing boiler available. Accel CS is a quiet champion in an arena of lightweights. Accel CS is made with up to 5 times more stainless steel than virtually all other condensing boilers. Combined with exceptional engineering, the result is a higher efficiency, higher quality, longer life, outstanding made in USA product. Accel CS is the most efficient condensing boiler and is an integrated system, which means it produces both heat and hot water, the largest energy consumers in cold climate homes. The advanced design optimizes condensing operation and recovers more quickly from night setback temperatures. The result is lower fuel bills and comfortable warmth for living spaces, plus nearly endless hot water for showers, kitchen, bath, and laundry.

Features & Benefits

  • Whisper Quiet
  • Nearly Endless Hot Showers
  • Proudly Made in USA
  • Up to 97% AFUE
  • Natural gas or propane
  • Convenient wall or floor mount

Energy Kinetics Resolute RT Boiler

Est. Installed Price*
$18,000 to $22,000

Est. Monthly Payment*
$325 to $450

Energy Kinetics Resolute RT Boiler

Recommended

Exceptional energy efficiency that sidewall vents or uses a polypropylene liner in your existing chimney without an expensive stainless steel liner.

Cuts fuel bills up to 40% or more!

Resolute boilers are ideal for homes with fin tube baseboards, cast iron radiators, air handlers, and unit heaters. Homeowners who install Resolute boilers enjoy economical heat and virtually endless hot showers with lower energy costs.

Features & Benefits

  • The energy converter is a proven 30 year spiral design for the highest efficiency. There are no sections or pins to foul, clean, or leak.
  • Removable stainless steel alloy combustion chamber for clean burning operation.
  • 13 foot flue passage boosts efficiency.
  • Hefty 2 inch thick insulation wrap for high efficiency and quiet operation.
  • Swing down door for easy access.
  • Advanced plate heat exchanger.
  • Air elimination for quiet operation.
  • Boiler-side Y-Strainer (Clean in Place).
  • High efficiency Taco circulators.
  • Hard water? Add a scale stopper for reliable operation (up to 25 grains of hardness) without cleaning!

Energy Kinetics System 2000

Est. Installed Price*
$17,000 to $20,000

Est. Monthly Payment*
$300 to $400

Energy Kinetics Hot Water Boilers

Recommended

When it comes to saving energy, nothing beats the Energy Kinetics System 2000. This compact boiler system provides both heat and hot water in a small and efficient package. The boiler itself is designed to save energy by dramatically reducing stand-by loss. This boiler system achieves the lowest total cost of ownership of any heating system we sell at Sippin Energy.  This is also our technical team’s favorite boiler! (see our media gallery for some installation pictures).

Features & Benefits


Navien Combi Gas Boiler

Est. Installed Price*
$9,500 to $12,000

Est. Monthly Payment*
$225 to $350

Navien Combination (heat & domestic hot water) High Efficiency Boiler

Recommended

Navien Combi high-efficiency gas boilers provide both heating and domestic hot water in a compact, high-efficiency gas fired system.

Features & Benefits

  • Ultrahigh efficiency over 95%
  • Long-lasting stainless steel heat exchangers
  • Can be vented with 2 inch PVC pipe
  • Can be powered by natural gas or propane
  • Compact stylish wall-mounted

Raypak-Ruud Pool Heaters

Est. Installed Price*
$4,500 to $6,000

Est. Monthly Payment*

Raypak Pool Heaters

The sleek and stylish Raypak Digital Gas Pool and Spa Heater features innovative technology designed to keep your pool or spa at the perfect temperature for your enjoyment. Built to withstand various weather conditions, this modern pool and spa heater is the perfect solution for environments requiring efficiency, convenience and versatility.

Features & Benefits

Thanks to a brilliant low-profile design, corrosion resistant cabinet made of galvanized metal, copper fin tube heat exchanger, and a bevy of advanced-engineered materials, enjoying your heater year round is a breeze.


Rinnai Combi Gas Boilers

Est. Installed Price*
$9500 to $12000

Est. Monthly Payment*
$211 to $267

Rinnai Combination (heat & domestic hot water) High Efficiency Boiler

Recommended

The perfect combination of reliability, technology, and performance in one compact unit. The Rinnai I-Series condensing gas boiler product lineup consists of heat-only and combi models that consistently provide simultaneous delivery of hot water and home heating without interruption.

Features & Benefits

  • User-friendly controls that are easy to understand
  • Ease of serviceability
  • High AFUE energy rating of 95%
  • Can be powered by natural gas or propane
  • Very compact, stylish, and wall-mounted

Spirit-Furnaces

Est. Installed Price*
$7,000 to $10,000

Est. Monthly Payment*
$150 to $300

Spirit Warm Air Furnaces By ThermoPride

Recommended

The Spirit furnace made by ThermoPride is a high quality high-efficiency furnace that is moderately priced. It features a heavy-duty 22 gauge powder coated cabinet and a drum style heat exchanger as well as a ceramic combustion chamber, resulting in a reliable and quiet running system.

Features & Benefits

  • 85% AFUE
  • High-Quality Beckett Burners
  • Multi-Speed PSC or Constant Torque ECM Blower Motors
  • Limited Lifetime Warranty
  • VH8FA119T60B Model is Energy Star Qualified

ThermoPride –  Furnace

Est. Installed Price*
$8,000 to $10,000

Est. Monthly Payment*
$125 to $300

ThermoPride Furnaces

Recommended

ThermoPride warm air furnaces are simply the best there is. It is evident from just looking at one of these units that they are built to last, but durability is only one feature of ThermoPride.

Features & Benefits

  • ThermoPride warm air furnaces are quiet, sometimes you can barely heart them running.
  • They also burn clean, thanks to the advanced refractory chamber design.
  • They are also efficient. This is largely due to the heat exchanger design. It is efficient and durable.
  • This is the longest lasting furnace we sell

Utica-Heating Systems

Est. Installed Price*
$11,000 to $14,000

Est. Monthly Payment*
$175 to $300

Utica Boilers

The new Starfire IV oil-fired water boiler is available in 9 sizes from 103 MBH to 252 MBH and features a dependable cast iron heat exchanger and a HydroLevel High Limit and Circulator Relay Control with LWCO, digital temperature display and diagnostics.

Features & Benefits

  • Efficiency: Mid-Efficiency
  • Heat Exchanger: Cast Iron
  • Combustion: Atmospheric
  • Venting: Chimney Vent
  • Boiler Type: Hot Water

Bosch-Heating & Hot Water Systems

Est. Installed Price*
Site visit required

Est. Monthly Payment*
Site visit required

Bosch Greenstar Gas Condensing Boilers

Space heating boiler for connection to a hot water tank with unsurpassed performance and control.

Features & Benefits

  • Aluminum-Silicon heat exchanger delivers high efficiency – 95% with low temperature applications
  • Low NOx emissions ahead of 2012 SCAQMD regulations
  • Simple, intelligent control options optimize efficiency and fuel consumption
  • Low electrical consumption when the boiler is in standby mode
  • Electronic ignition
  • Anti-cycle and modulation control

Buderus – Heating

Est. Installed Price*
$17,00 to $20,000

Est. Monthly Payment*
$300 to $450

Buderus Hot Water Boilers

For the ultimate in home heating, Burderus has been the choice for high-end heating for decades. representing European cutting-edge technology, Buderus has combined a compact, high efficiency boiler with an indirect hot water heater that makes an unbeatable combination.

Features & Benefits

  • In the vertically stacked configuration, the system takes up a minimal amount of floor space, yet provide fast reliable heat, and a near limitless supply of domestic hot water.
  • The Buderus system also features a high performance digital system manager. This digital control system serves many functions, that all result in improved comfort and economy.

Burnham Hydronics – Heating

Est. Installed Price*
$12,000 to $16,000

Est. Monthly Payment*
$250 to $350

Burnham-US Boiler Steam Boilers

Burnham boilers provide a wide variety of high efficiency designs to accommodate any budget.  Our recommended boiler for steam applications is the US boiler/Burnham Hydronics mega steam.

Features & Benefits

  • The cast iron MPO series features a wet-base cast iron design which is both durable and efficient.
  • Burnham boilers can be equipped with either a Beckett sound insulated burner or a high efficiency Riello burner for even greater efficiency and reliability.

Modine Hydronic Unit Heater

Est. Installed Price*
$3,500 to $5,000

Est. Monthly Payment*
$100 to $200

Modine Hydronic Unit Heater

Available with top/bottom (Model HS) or side (Model HC) inlet/outlet piping, Modine horizontal steam/hot water unit heaters install quickly, easily and at low cost because they are lightweight. These units are particularly useful in greenhouses with low ceilings and are normally placed around the perimeter of the greenhouse to create a warm air blanket along the walls.

Features & Benefits

  • This permits the unit to be rotated 360° without piping changes.
  • This permits the unit to be installed in low clearance areas.
  • Units have a 2-piece casing for easy coil access.
  • All models have tapped holes for suspension by threaded rod or
  • optional pipe hanger adapter kit, except HSB 18 and HSB 24 which mount directly to and are supported by the supply and return piping.
  • Serpentine copper tube coil design has high resistance to thermal shock, even under high steam pressures.
  • Absence of coil headers eliminates potential leaks and increases coil face area without increasing overall size of unit.
  • Coil designed for greater water carrying capacity with lower friction loss.

Modine Warm Air Space Heaters

Est. Installed Price*
$4,500 to $6,000

Est. Monthly Payment*
$100 to $150

Modine Hot Dawg Forced Air Heater

Modine’s Hot Dawg is widely recognized as the industry’s most popular residentially-certified gas-fired unit heater, with six sizes available from 30,000 – 125,000 BTUs. It is an ideal solution for residential garages and workshops, along with light commercial or industrial applications.

The Special Edition trim kits are now available in three different style options. These kits fit new or existing Hot Dawg unit from 30,000 – 75,000 BTUs.

Features & Benefits

  • Use your workspace – comfortably – year-round
  • Only Modine offers numerous colors and appearance kits, letting you heat your space in style
  • Free up more workspace by getting rid of space heaters that clutter up the area
  • Quieter garage with the Hot Dawg thanks to noise levels less than other units (see brochure for specs)
  • Units work with propane or natural gas and conversion kits are available too in case you change heating sources
  • Trouble-free motor dependability
  • Simplified side-wall or roof venting with small-diameter vent pipes

Navien-Heating Systems

Est. Installed Price*
$11,000 to $14,000

Est. Monthly Payment*
$250 to $400

Navien Gas Boilers

Navien gas boilers offer a high-efficiency and compact wall mounted boiler that can provide heating and hot water.

Features & Benefits

  • Super condensing efficiency
  • Dual stainless steel heat exchangers
  • SCH40, 2” PVC venting up to 60’
  • ½” Gas pipe up to 24’
  • TDR up to 10:1
  • integrated controls

Peerless Boilers – Heating

Est. Installed Price*
$12,000 to $14,500*

Est. Monthly Payment*
$180 to $220*

Peerless Cast Iron Boilers

Peerless Boilers have always been know for their high efficiency and outstanding durability. Quality cast iron construction combined with innovative design makes these hot water boilers an outstanding choice for hot water heating.

Features & Benefits

  • Peerless boilers are also available in direct vent configurations that allow for efficient low cost installation without a conventional chimney.
  • Peerless boilers are available in hot water and steam models, and are available with a variety of high efficiency oil burners including Riello, Carlin, and Beckett

Peerless MI Cast Iron Gas Boiler

Est. Installed Price*
$1,2000 to $14,000

Est. Monthly Payment*
$150 to $185*

Peerless Cast Iron Gas Boiler MI Series

The Series MI™ residential, cast iron, hot water boiler is fully packaged and ready-to-install in conventional chimney applications. The key component of the Series MI™ boiler is the heat exchanger which features a greater percentage of cast iron than the competition for a long life of durability and dependability. The front-facing integral draft diverter lends to a low-profile design allowing for installation in tight spaces with low ceilings. Backed by a non-prorated lifetime warranty on the heat exchanger, the Series MI™ is a top choice!

Features & Benefits

  • Type: Residential\
  • Construction: Cast Iron
  • Fuel: Gas-Fired (Natural or LP)
  • Input: 70 to 260 MBH
  • Output: 58 to 211 MBH
  • Venting: Natural Draft
  • Trim: Water
  • Ignition: Spark Pilot

Peerless Purefire Gas Boiler – Heating

Est. Installed Price*
require site visit

Est. Monthly Payment*

PEERLESS® PUREFIRE® RESIDENTIAL BOILER

The Peerless® PureFire® stainless steel condensing boiler is Energy Star® certified with a 95% efficiency and can be used in residential/light commercial applications. Boilers are equipped with a modern LCD control board that provides operational status in easy-to-read plain English! The boiler is fully factory tested for long-term dependability and backed by a one year parts and labor warranty (upon product registration) and 12-year warranty on the heat exchanger for extra peace of mind!

Features & Benefits

  • The Peerless Purefire comes equipped with a state-of-the-art control board that can change the burner input rates to match the outdoor temperature for comfortable, economic operation.

Rinnai Warm Air Space Heaters

Est. Installed Price*
Site visit required

Est. Monthly Payment*
Site visit required

EnergySaver® Direct Vent Wall Furnace

With a Rinnai EnergySaver® Direct Vent Wall Furnace, you can be assured of consistent comfort and warmth. Designed to constantly monitor room temperature, Rinnai’s unique modulating technology can respond immediately to even the smallest temperature fluctuations by optimizing gas use.

Features & Benefits

  • Consistent, even heat
  • User-friendly controls
  • Wall thermostat compatible
  • Versatile installation options
  • Uses modulating technology

RUUD Furnaces

Est. Installed Price*
$6,500 to 7,500

Est. Monthly Payment*
$150-$300

RUUD Furnaces

Ruud Achiever® Series Oil Furnaces are built for the low-profile needs of today’s homes. You can rely on quiet and affordable comfort for years to come.

Features & Benefits

  • Built strong with reinforced parts to last long
  • Multiple motor options like a 4-speed PSC motor or a high-efficiency ECM motor allow for variable speeds to automatically adjust to correct temperatures. This saves you energy and money!
  • Compatible with the best burner brands on the market, you can choose between Beckett®, Carlin® and Reillo® if you have a preference so it is equipped the way you want!

Weil-McLain-Oil Fired Boilers

Est. Installed Price*
$12,000 to $14,000

Est. Monthly Payment*
$225 to $350

Weil-McLain Oil Fired Boilers

Whether you’re in the market for residential boilers or commercial boilers—for a new application or retrofit—look to Weil-McLain.

Features & Benefits

  • Quick open top and swing-away burner door with full chamber access increases visibility for inspection and servicing
  • Two flue outlets- rear and top – for complete venting flexibility
  • Includes factory-wired circulator, service switch and Weil-McLain exclusive captured elastomer seals for added reliability

Williamson-Furnaces

Est. Installed Price*
$6,500 to $8,500

Est. Monthly Payment*
$150 to $250

Williamson Furnaces

Whether you are looking for information on residential boilers, furnaces, commercial heating products or air conditioning equipment, Williamson has what you need.

Features & Benefits

  • AFUE’s to 86%
  • Heat exchanger – Heaviest in the industry, Front flue with top or right side venting option, Interior baffling for maximum efficiency, Dual spring-loaded clean-out ports for easy service and maintenance, Spring-loaded observation port with test port, Heavy gauge burner mounting plate with studs and nuts
  • Blower – Variable Speed ECM, Multi-speed Direct Drive, Slide-out blower/motor- easily removed for service
  • Cabinet – Appliance finish powder coat paint, Heavy gauge with “Seal-Tite” construction, Foil-faced insulation for hand-cool surface, Fully-enclosed burner and controls
  • Combustion Chamber – Preformed slide-out chamber for easy service
  • Burner and controls – Factory-wired with simple plug-in connections, PSC motor, Solid state ignitor